CAT 2C6000

The Cat CAT 2C6000 forklift is ideal for industrial applications both indoors and outdoors. Equipped with an efficient and clean engine, these proven engines provide an exceptional balance of power and performance necessary for use in demanding applications.

Low emission engines
Fuel efficient
Easy maintenance
PDS safety system

Category: Straight Mast Forklifts

Technical Specifications

REACH SPECIFICATIONS
Capacity at rated load center	6,000lb
Capacity at load center – distance	24 In
Power – electric, diesel, gasoline or LP gas	LP Gas
Tire type – cushion or pneumatic	Cushion
Wheels (x=driven) – number front / rear	2x / 2
Dimensions
Lift	240.5 in
Forks – length x width x thickness	42 x 4.9 x 1.8 in
Fork spacing – out-to-out minimum / maximum	7.9 / 32
Tilt – forward / backward	5° / 6°
Length to fork face	96.5 in
Width – with standard tires	43.9 in
Width – with standard tires, wide-stance	45.5 in
Width – with standard tires, wide-axle
Width – with dual drive tires	64.6 in
Height – mast lowered	83.0 in
Height – seat height	43.3 in
Height – top of overhead guard	81.5 in
Height – mast extended	179 in
Minimum outside turning radius	82.5 in
Load moment constant	17.2 in
Minimum aisle - 90° stack - zero clearance w/out load	99.6
PERFORMANCE
Travel speed loaded / empty	10.0 / 10.5 mph
Lift speed loaded / empty	105 / 105 fpm
Lowering speed loaded / empty	98 / 98 fpm
Drawbar pull – loaded at 1 mph (1.6 kph)	4,840 lb
Drawbar pull – loaded maximum	6,800 lb
Gradeability – loaded at 1 mph (1.6 kph)	33%
WEIGHT
Empty	9,440 lb
Axle load – without load front / rear	2,820 / 6,580 lb
Axle load – with load front	13,320 lb
CHASIS
Tire size – front, standard	21 x 8 x 15 in
Tire size – rear	16 x 6 x 10.5 in
Tire size – rear tires	6.0 x 9 - 10PR in
Wheelbase	55.1 in
Tread width – front, standard tires	35.9 in
Tread width – rear tires	38.6in
Tread width – front, wide-stance tires	37.5 in
Ground clearance – at center of wheelbase	6.6in
Tread width – rear, standard tires	35 in
Ground clearance – at lowest point of mast	3.1 in
Ground clearance – at center of wheelbase	5.5 in
Service brakes	Foot, Hydraulic
Parking brakes	Hand, Mechanical
POWER TRAIN
Engine mode	K25E
Continuous output (S.A.E. gross)	63 HP
Maximum torque (S.A.E. gross)	139 lb-ft
Cylinder / displacement	4 / 152 cu in
Transmission type	Powershift
Number of speeds forward / reverse	1 / 1
Battery	12
Hydraulics
Relief pressure – For attachments at auxiliary valve	2,630 psi
Hydraulic flow – For attachments at auxiliary valve	23.5 gpm