JLG G9-43A Material Handler

  • 9,000 lb (4082 kg) Capacity
  • 43 ft (13.1 m) Lift Height
  • Rough Terrain Mobility
  • All-Wheel Steering
Category:

Performance Specifications

Rated Capacity at 24 in. (610 mm) load center.................................................9,000 lb. (4,082 kg)   

MAXIMUM LIFT HEIGHT . . . . . . . . . .43 ft. (13.1 m)

MAXIMUM REACH . . . . . . . . . . . . . .30.5 ft. (9.3 m)

MAXIMUM CAPACITY at Maximum Lift Height. . . . . . . . . . . . . . . . . . . . . 7,000 lb. (3,175 kg)

MAXIMUM CAPACITY at Maximum Reach. . . . . . . . . . . . . . . . . . . . . . .1,500 lb. (680 kg)

HEIGHT. . . . . . . . . . . . . . . . . . . . . 95.5 in. (2.4 m)

WIDTH . . . . . . . . . . . . . . . . . . . . .95.3 in. (2.4 m)

WHEELBASE . . . . . . . . . . . . . . . ..132.0 in. (3.4 m)

OUTSIDE TURNING RADIUS . . . . . . ..12 ft. (3.7 m)

Powershift Transmission ..............4-Speed FWD
..................................................................3-Speed REV

FRAME LEVELING . . . . . . . . . . . . . . . ..10 degrees

Maximum Travel Speed............................................19.5 mph (31.4 km/hr)

Operating Weight without Carriage and Forks....................................25,200 lb. (11,431 kg)

OPTIONAL ACCESSORIES

AUXILIARY HYDRAULIC CIRCUIT

Required for all attachments equipped with cylinders or other hydraulic components. Consists of
valves, left hand controls and hydraulic lines

CAB ENCLOSURE

Lockable, split door; heater; defroster fan; washer and wind shield wiper.

LIGHT GROUP

COLD WEATHER START PACKAGE

RADIAL TIRES

TILT ON JOYSTICK

ATTACHMENTS

TILT CARRIAGE . . . . . . . . . . . . . . . . . . 48" (1.2 m)

TILT CARRIAGE . . . . . . . . . . . . . . . . . . 72" (1.8 m)

* SLOPE PILE CARRIAGE . . . .48" (1.2 m) & 72” (1.8 m)

*DRYWALL CARRIAGE . . . . . . . . . . . . . . 72" (1.8 m)

*100° SWING CARRIAGE. . . . . . . . . . . 72" (1.8 m)

PALLET FORKS
2" x 4" x 48" (50.8 mm x 101.6 mm x 1.2m)

CUBING FORKS
2" x 2" x 48" (50.8 mm x 50.8 mm x 1.2m)

* BOOM HEAD MOUNTED WINCH

* VERTICAL MAST . . . . . . . . .6' (1.8 m) QUICK-SWITCH

* SWING MAST . . . . . . . . . . . . . . . . . . . . .6' (1.8 m)

TRUSS BOOM . . . . . . . .10' (3.0 m) and 15’ (4.6 m)

BUCKET . . . . . . . . . . . . . . . . . . . .0.75 CY (.57 m3)

BUCKET . . . . . . . . . . . . . . . . . . .1.25 CY (0.95 m3)

BUCKET . . . . . . . . . . . .102” wide-1.25 CY (0.95 m3)

* TRUSS BOOM
WITH WINCH . . . . . . . . .10' (3.0 m) and 15’ (4.6 m)

PERSONNEL WORK PLATFORM

* Requires auxiliary hydraulics

DRIVE LINE SPECIFICATIONS:

ENGINE

Make and Model . . . . . . . . . . . John Deere 4045TF150

Fuel . . . . . . . . . . . . .No. 2 Diesel

Cycles . . . . . . . . . . . . .4

No. of Cylinders . . .. .4

Displacement . . . . . . . . . . . . . . 276 cu. in. (4.5 L)

Rated Speed . . . . . . . . . . . . . . . 2500 rpm

Max. Gross BHP . . . . . . . . . . . . 99 HP (74 kW)

Fuel Tank . . . . . . . . . . . . . . . . . 38 gal (141 L)

ENGINE FILTERS

Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus cleanable and
replaceable dry filter element. Visual service indicator. Replaceable element-type fuel filter/water separator.

Full-flow replaceable-element engine oil filter.

ELECTRICAL SYSTEM

Voltage — 12V

Alternator— 63 amp

Battery - 810 Cold Cranking AMP at 0°F

TRANSMISSION

Dana VDT-12000 powershift with torque converter.

Neutral start switch (park brake must also be engaged to start).

Full time 4-wheel drive.

Directional and gear change control on single steering column mounted lever.

AXLES

Trunnion mounted planetary 55° steer axles.

Integral steer cylinder.

High bias limited slip differential on front axle.

SERVICE BRAKES

Inboard wet disc brakes on front and rear axles.

PARKING BRAKES

Wet disc spring-applied hydraulic release on front axle. Light on dash indicates when brake is on.

TIRES

Standard: 13:00x24 — 12PR, G2 type.
Optional: 13:00R24 radial tires, 15.5-25 12PR L2.

STEERING 4-WHEEL

Power steering with manual backup.

Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.

INSTRUMENTS

Volt meter, hour meter, engine oil pressure gauge, fuel gauge, water temp. gauge.
All gauges protected by clear acrylic covers.

CONTROL

Grouped for operator comfort and convenience.
Boom lift and crowd on single joystick.
Right-hand tilt and sway lever.
Foot throttle.

HYDRAULIC SYSTEM-IMPLEMENT

Tandem gear pump.
40 gal (151.4 L) system capacity.
8 micron filters with visual service indicator and suction strainer.
Lift, crowd, tilt and sway cylinders have holding valves intended to prevent
dropping of load in the event of hose failure.

This machine is designed to meet specifications of ASME B56.6b-1998 for rough terrain forklift trucks. It is Gradall Policy to continually improve its products. Therefore, designs, materials and specifications are subject to change without notice and without incurring any liability on units already sold. Units pictured are equipped with optional equipment. See applicable specifications and price lists for optional equipment.

Scroll to Top