Performance Specifications |
Rated Capacity at 24" (610 mm) |
MAXIMUM LIFT HEIGHT . . . . . . . . . 42 ft (12.8 m) |
MAXIMUM REACH . . . . . . . . . . . . . 29 ft (8.8 m) |
MAXIMUM CAPACITY at Maximum Lift Height. . . . . . . . . . . . . . . . . . . . . 6,000 lb (2,722 kg) |
MAXIMUM CAPACITY at Maximum Reach. . . . . . . . . . . . . . . . . . . . . . .1,000 lb (454 kg) |
HEIGHT. . . . . . . . . . . . . . . . . . . . . 94 in (2.4 m) |
WIDTH . . . . . . . . . . . . . . . . . . . . .96 in (2.4 m) |
WHEELBASE . . . . . . . . . . . . . . . .128 in (3.25 m) |
OUTSIDE TURNING RADIUS . . . . . . .12 ft (3.7 m) |
TRANSMISSION . . . . . . . . . . . . . .Hydrodynamic |
FRAME LEVELING . . . . . . . . . . . . . . . .10 degrees |
LIFT SPEED (Boom Retracted) Empty . . . . . . . . . . . . . . .97 f.p.m. (29.5 m/min) |
MAXIMUM TRAVEL SPEED Standard 80 HP with 3-Speed. . . . . . . . . . . . . . . . . . . .16 mph (25.7 km/hr) Optional 100 HP with 4-Speed. . . . . . . . . . . . . . . . . . . .22 mph (35.4 km/hr) DRAWBAR PULL (Loaded) . . . . . . . . . .18,000 lb (7,390 kg) OPERATING WEIGHT . . . . . .20,400 lb (9,280 kg) |
OPTIONAL ACCESSORIES |
TURBOCHARGED ENGINE John Deere 4045TF150 100 HP |
CAB ENCLOSURE Lockable, split door; heater; defroster fan; washer and windshield wiper. |
HEATER & DEFROSTER FAN |
LIGHT GROUP 2 cab-mounted headlights, 1 backup/ . tail/stoplight and rotating beacon. |
AUXILIARY HYDRAULIC CIRCUIT Required for all attachments equipped with cylinders or other hydraulic components. Consists of valves, left hand controls, hydraulic lines. |
COLD WEATHER GROUP Ether start and block heater. |
RADIAL TIRES |
TILT ON JOYSTICK |
DRIVE LINE SPECIFICATIONS: |
ENGINE Make and Model . . . . .John Deere 4045DF150 Fuel . . . . . . . . . . . . .No. 2 Diesel Cycles . . . . . . . . . . . . .4 No. of Cylinders . . . . . .4 Displacement . . . . . . . .276 cu. in. (4.5 L) Rated Speed . . . . . . . .2500 rpm Max. Gross BHP . . . . .80 HP (60 Kw) Fuel Tank . . . . . . . . . . .38 gal (141 L) |
ENGINE FILTERS Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus Visual service indicator. Replaceable element-type fuel filter/water separator. Full-flow replaceable-element engine oil filter. |
ELECTRICAL SYSTEM Voltage — 12V Alternator— 63 amp Battery - 810 Cold Cranking AMP at 0°F |
TRANSMISSION Dana VDT-12000 powershift with torque converter Neutral start switch (park brake must also be engaged to start) Full time 4-wheel drive. Directional and gear change control on single steering column mounted lever |
AXLES Trunnion mounted planetary 55° steer axles. Integral steer cylinder High bias limited slip differential on front axle. |
SERVICE BRAKES Inboard wet disc brakes on front axle. |
PARKING BRAKES Wet disc spring-applied hydraulic release. Light on dash indicates when brake is on. |
TIRES Standard: 13:00x24 — 12PR, G2 type Optional: 13:00R24 radial tires, 15.5-25 12PR L2. |
STEERING 4-WHEEL Power steering with manual backup. |
INSTRUMENTS Volt meter, hour meter, engine oil pressure gauge, fuel gauge, water temp. gauge. |
CONTROL Grouped for operator comfort and convenience. |
HYDRAULIC SYSTEM-IMPLEMENT Single-section gear pump. |
This machine is designed to meet specifications of ASME B56.6b-1998. It is our policy to continually |
JLG G6-42A Material Handlers
- Rough Terrain
- All-Wheel Steering
- 6,600lb (3,000 kg) Lift Capacity
- 42ft (12.8 m) Lift Height